Kitchen Wrapping Sydney
Kitchen Cabinet Wrapping in Strathfield

Strathfield · 2135 · Insured

Kitchen cabinet wrapping in Strathfield

Strathfield's large Federation homes and established brick unit blocks along the rail corridor tend to hold onto a kitchen for a generation before anyone touches it, because the rest of the house or apartment is otherwise in good order. Wrapping refreshes that kitchen without disturbing anything around it.

From $4900job — Guide only — fixed quote after free measure

What's included

  • ✓Every cabinet door and drawer front wrapped, both faces where visible
  • ✓End panels and exposed carcass sides wrapped to match
  • ✓Kickboards wrapped or replaced to suit the new finish
  • ✓Existing handles, hinges, and soft-close mechanisms removed and refitted
  • ✓Edges sealed and detailed around sinks, cooktops, and appliance gaps
  • ✓Colour and finish selected from 3M DI-NOC, Bodaq, Cover Styl, and LX Benif ranges

Strathfield context

What kitchen cabinet wrapping looks like in Strathfield

Many of Strathfield's grand Federation and interwar homes have a kitchen from a mid-life renovation — good quality joinery in a finish that's now thirty or more years old — while the low-rise brick unit blocks near the station carry a similar-era laminate fitout. Owners here are frequently multi-generational households who want the kitchen updated without the weeks of disruption a full renovation brings to a busy family home. Wrapping the cabinets in a current finish solves that without touching the layout the household already relies on.

Recent Strathfield job

A typical job here: a 16-door Federation-home kitchen wrapped in a matte stone-grey Bodaq finish with new-look end panels, two and a half days on site, around $6,100.

Our process — same standard, every booking

  1. 1

    Free measure & film selection

    We measure every door, drawer, and panel on site and go through finish samples in your own kitchen light — matte, gloss, timber grain, or stone.

  2. 2

    Surface prep & degrease

    Doors are cleaned back to bare laminate or timber and fully degreased — kitchen grease is the single biggest cause of a wrap failing, so this step doesn't get rushed.

  3. 3

    Precision wrap & edge sealing

    Film is applied door by door with heat-formed edges and sealed returns, so there are no lifting corners around handles, hinges, or sink cut-outs.

  4. 4

    Hardware reinstall

    Handles, hinges, and runners go back on and are checked for alignment — doors close the same as before, just in a new finish.

  5. 5

    QA walkthrough

    We walk every door and drawer with you before we leave, checking edges, corners, and colour match under your kitchen's actual lighting.

Kitchen Cabinet Wrapping questions, answered

  • How long will the wrap actually last?
    We back workmanship for 5 years, and the premium films we use (3M DI-NOC, Bodaq) carry manufacturer warranties up to 10 years on vertical cabinet surfaces with normal kitchen use. Benchtops wear faster than cabinet doors — see our benchtop wrapping page for honest numbers on that surface specifically.
  • Is this the same as the vinyl wrap kitchens that used to peel?
    No. What people remember peeling in the 2000s was factory-applied thermofoil — a thin PVC skin heat-pressed onto MDF doors at the factory, with no real adhesive bond, that failed around handles and heat sources within a few years. What we install is architectural film applied on site with commercial-grade adhesive systems designed for exactly this job, with proper edge and corner detailing. Different product, different process.
  • Will it hold up near my oven and cooktop?
    Doors and panels directly adjacent to ovens, cooktops, and dishwashers need extra detailing — we assess heat exposure at the free measure and use heat-rated film or a heat shield where needed. If a spot genuinely won't hold up, we'll tell you before you pay for it.
  • How much cheaper is this than a new kitchen?
    For a standard Sydney kitchen, replacement joinery typically runs $20,000-$35,000+. Wrapping the same cabinets is usually 70-80% cheaper, because you're keeping the carcass, benchtop, and layout and refinishing what's visible.
  • How long is my kitchen out of action?
    Most full kitchens take 2-3 days; smaller kitchens can be done in 1-2. There's no demolition and no fumes, so you can use the sink and fridge between sessions — it's not like a full reno where the kitchen is gutted for weeks.

Related services in Strathfield

You might also need

Call nowGet a quote