Kitchen Wrapping Sydney
Kitchen Cabinet Wrapping in Bondi

Bondi · 2026 · Insured

Kitchen cabinet wrapping in Bondi

Bondi kitchens run from tight 1970s beachside unit galleys to knocked-through terrace conversions further from the sand, and both tend to hit the same wall: the layout still works, but the finish is stuck in whatever decade the block was built. Wrapping refreshes the cabinets you already have in 2-3 days, without touching the layout or the plumbing.

From $4900job — Guide only — fixed quote after free measure

What's included

  • ✓Every cabinet door and drawer front wrapped, both faces where visible
  • ✓End panels and exposed carcass sides wrapped to match
  • ✓Kickboards wrapped or replaced to suit the new finish
  • ✓Existing handles, hinges, and soft-close mechanisms removed and refitted
  • ✓Edges sealed and detailed around sinks, cooktops, and appliance gaps
  • ✓Colour and finish selected from 3M DI-NOC, Bodaq, Cover Styl, and LX Benif ranges

Bondi context

What kitchen cabinet wrapping looks like in Bondi

A lot of Bondi's home unit stock along Bondi Road and Wairoa Avenue dates to the 1960s and 70s, with original laminate kitchens that are structurally sound but visually tired — replacing them means a full strata-approved reno for a kitchen the size of a parking bay. Terrace conversions further back from the beach often carry a builder-grade 2000s kitchen that was never meant to be a design feature. Because we're based in Bondi, these are our fastest-turnaround jobs — often measured and quoted within days.

Recent Bondi job

A typical job here: an 11-door 1970s laminate unit kitchen wrapped in a warm white matte 3M DI-NOC finish with new-look end panels, one and a half days on site, around $5,100.

Our process — same standard, every booking

  1. 1

    Free measure & film selection

    We measure every door, drawer, and panel on site and go through finish samples in your own kitchen light — matte, gloss, timber grain, or stone.

  2. 2

    Surface prep & degrease

    Doors are cleaned back to bare laminate or timber and fully degreased — kitchen grease is the single biggest cause of a wrap failing, so this step doesn't get rushed.

  3. 3

    Precision wrap & edge sealing

    Film is applied door by door with heat-formed edges and sealed returns, so there are no lifting corners around handles, hinges, or sink cut-outs.

  4. 4

    Hardware reinstall

    Handles, hinges, and runners go back on and are checked for alignment — doors close the same as before, just in a new finish.

  5. 5

    QA walkthrough

    We walk every door and drawer with you before we leave, checking edges, corners, and colour match under your kitchen's actual lighting.

Kitchen Cabinet Wrapping questions, answered

  • How long will the wrap actually last?
    We back workmanship for 5 years, and the premium films we use (3M DI-NOC, Bodaq) carry manufacturer warranties up to 10 years on vertical cabinet surfaces with normal kitchen use. Benchtops wear faster than cabinet doors — see our benchtop wrapping page for honest numbers on that surface specifically.
  • Is this the same as the vinyl wrap kitchens that used to peel?
    No. What people remember peeling in the 2000s was factory-applied thermofoil — a thin PVC skin heat-pressed onto MDF doors at the factory, with no real adhesive bond, that failed around handles and heat sources within a few years. What we install is architectural film applied on site with commercial-grade adhesive systems designed for exactly this job, with proper edge and corner detailing. Different product, different process.
  • Will it hold up near my oven and cooktop?
    Doors and panels directly adjacent to ovens, cooktops, and dishwashers need extra detailing — we assess heat exposure at the free measure and use heat-rated film or a heat shield where needed. If a spot genuinely won't hold up, we'll tell you before you pay for it.
  • How much cheaper is this than a new kitchen?
    For a standard Sydney kitchen, replacement joinery typically runs $20,000-$35,000+. Wrapping the same cabinets is usually 70-80% cheaper, because you're keeping the carcass, benchtop, and layout and refinishing what's visible.
  • How long is my kitchen out of action?
    Most full kitchens take 2-3 days; smaller kitchens can be done in 1-2. There's no demolition and no fumes, so you can use the sink and fridge between sessions — it's not like a full reno where the kitchen is gutted for weeks.

Related services in Bondi

You might also need

Call nowGet a quote