Kitchen Wrapping Sydney
Built-In Wardrobe Wrapping in Parramatta

Parramatta · 2150 · Insured

Built-in wardrobe wrapping in Parramatta

Parramatta's rapid high-rise growth sits alongside older unit blocks that have carried the same built-in wardrobes since the 1980s and 90s. Wrapping updates either without adding to the suburb's constant construction noise.

From $1290job — Guide only — fixed quote after free measure

What's included

  • ✓Hinged and sliding wardrobe door faces wrapped in place
  • ✓End panels and exposed carcass faces included
  • ✓Handle and hinge removal, refit, and realignment
  • ✓Edge sealing on every cut and joint
  • ✓Colour and finish matched or contrasted to the room on request

Parramatta context

What built-in wardrobe wrapping looks like in Parramatta

Parramatta's older unit stock, much of it from the 1980s and 90s boom before the current tower wave, was built with mirrored sliding wardrobes as a bedroom standard, and those original fitouts are still in most of these apartments today. Newer towers built over the last decade have their own version of the same problem sooner than owners expect — project-builder laminate finishes that don't hold up as well as they look on handover day. In a CBD with constant construction and tight strata noise rules, a same-day surface wrap avoids adding to that noise and doesn't need the sign-off a structural change would.

Recent Parramatta job

A typical job here: a mirrored sliding wardrobe in a Church Street unit dating to the early 1990s, frame wrapped in a matte walnut-look film with the mirror retained. Guide price from $1,290, completed in a single day.

Our process — same standard, every booking

  1. 1

    Free measure & film selection

    We measure every door and panel on site and go through film samples — matte, timber grain, linen, stone — so you're picking a finish you've actually held, not a swatch on a screen.

  2. 2

    Surface prep & degrease

    Doors come off, hardware comes out, and every face is degreased and sanded back so the film has a clean surface to bond to.

  3. 3

    Precision wrap & edge sealing

    Film is applied door by door with heat-formed edges — no lifting corners, no visible seams on flat faces.

  4. 4

    QA walkthrough

    Doors are rehung, hardware refitted and aligned, and we walk the whole wardrobe with you before we call it done.

Built-In Wardrobe Wrapping questions, answered

  • Do you remove the wardrobe to wrap it?
    No. Doors come off their tracks or hinges to wrap flat on a bench, but the carcass stays in place. Most built-ins are done in a day.
  • Can you wrap over mirrored sliding doors?
    We wrap the door frames and any solid panels. Full mirror faces are usually left as mirror or replaced with a solid insert — we'll talk through the options at the measure.
  • Will the film peel like the old vinyl wardrobe doors I remember?
    Those were factory thermofoil, a thin heat-shrunk coating that lifts at the edges over time. Architectural film is a different product bonded and edge-sealed on site, backed by a 5-year workmanship warranty on top of manufacturer warranties of up to 10 years.
  • What finishes are available?
    3M DI-NOC, Bodaq, Cover Styl, and LX Benif ranges — matte, timber grain, linen, stone, and solid colours including whites that match modern joinery.
  • How much cheaper is this than replacing the wardrobe?
    A fraction of the cost of new joinery, with no demolition, no waste removal, and no weeks of waiting on a cabinetmaker.

Related services in Parramatta

You might also need

Call nowGet a quote