Kitchen Wrapping Sydney
Built-In Wardrobe Wrapping in Maroubra

Maroubra · 2035 · Insured

Built-in wardrobe wrapping in Maroubra

Maroubra's brick unit blocks from the 1980s and 90s mostly still have their original mirrored sliding wardrobes. The mirrors are usually fine; it's the surrounding frame and carcass finish that's given up.

From $1290job — Guide only — fixed quote after free measure

What's included

  • ✓Hinged and sliding wardrobe door faces wrapped in place
  • ✓End panels and exposed carcass faces included
  • ✓Handle and hinge removal, refit, and realignment
  • ✓Edge sealing on every cut and joint
  • ✓Colour and finish matched or contrasted to the room on request

Maroubra context

What built-in wardrobe wrapping looks like in Maroubra

Maroubra's family-friendly unit blocks near the beach were built in a wave through the 1980s and 90s, and mirrored sliding wardrobes were the standard bedroom fitout in almost all of them. Three decades on, the laminate edges and door frames have usually chipped or discoloured even where the mirror glass itself is undamaged. A wrap lets us refresh the frame and carcass in a current colour while keeping the functional sliding mechanism and mirror intact, which is far less disruptive than pulling the whole unit out. It suits owner-occupiers upgrading a bedroom as much as landlords refreshing a unit for a new tenancy.

Recent Maroubra job

A typical job here: a two-panel mirrored slider in a Marine Parade unit, chipped laminate frame wrapped in a matte grey film with the original mirror kept in place. Guide price from $1,290, finished in one visit.

Our process — same standard, every booking

  1. 1

    Free measure & film selection

    We measure every door and panel on site and go through film samples — matte, timber grain, linen, stone — so you're picking a finish you've actually held, not a swatch on a screen.

  2. 2

    Surface prep & degrease

    Doors come off, hardware comes out, and every face is degreased and sanded back so the film has a clean surface to bond to.

  3. 3

    Precision wrap & edge sealing

    Film is applied door by door with heat-formed edges — no lifting corners, no visible seams on flat faces.

  4. 4

    QA walkthrough

    Doors are rehung, hardware refitted and aligned, and we walk the whole wardrobe with you before we call it done.

Built-In Wardrobe Wrapping questions, answered

  • Do you remove the wardrobe to wrap it?
    No. Doors come off their tracks or hinges to wrap flat on a bench, but the carcass stays in place. Most built-ins are done in a day.
  • Can you wrap over mirrored sliding doors?
    We wrap the door frames and any solid panels. Full mirror faces are usually left as mirror or replaced with a solid insert — we'll talk through the options at the measure.
  • Will the film peel like the old vinyl wardrobe doors I remember?
    Those were factory thermofoil, a thin heat-shrunk coating that lifts at the edges over time. Architectural film is a different product bonded and edge-sealed on site, backed by a 5-year workmanship warranty on top of manufacturer warranties of up to 10 years.
  • What finishes are available?
    3M DI-NOC, Bodaq, Cover Styl, and LX Benif ranges — matte, timber grain, linen, stone, and solid colours including whites that match modern joinery.
  • How much cheaper is this than replacing the wardrobe?
    A fraction of the cost of new joinery, with no demolition, no waste removal, and no weeks of waiting on a cabinetmaker.

Related services in Maroubra

You might also need

Call nowGet a quote